Turbo-action 22997 (PRN21) / 22998 (PRN12) Powerglide Pro Brake Bedienungsanleitung PDF herunterladen

Part #22997 & #22998 1 2/90,4/99

1535 Owens Road, Jacksonville, FL 32218 (904)741-4850

FAX (904)741-4853

CHEETAH PRO SERIES

POWERGLIDE TRANZ BRAKE VALVE BODY

(Manual Control Only)

(1962-73)

Parts Included: 1 - 22997 Valve Body (Stock Shift Pattern PRN21)

1 - 22998 Valve Body (Reverse Shift Pattern PRN12)

1 - 22280B Solenoid (Two Wire)

1 - 22072 Pan Gasket

1 - 22076 Filter Gasket

1 - 22077-1 Modulator Gasket

2 - 00781A Terminal Female Snapplug

2 - 00782A Terminal Male Snapplug

FIRST, READ INSTRUCTIONS CAREFULLY, THEN PROCEED TO INSTALL VALVE BODY BY

FOLLOWING EACH STEP INDIVIDUALLY.

It is suggested that you do all modifications for maximum performance.

STEP #1: Place transmission in park.

STEP #2: Remove drain plug and drain oil. Remove pan.

STEP #3: Remove modulator and small rod if so equipped.

STEP #4: Remove 2 bolts holding shift lever guide plate. NOTE position of shift lever and manual

valve. Also note position of the small spring that gives detent pressure for shift lever, (See

Fig. #1).

STEP #5: Remove six valve body bolts that hold valve body in place (See holes in new valve body

included). (See Fig. #2)

STEP #6: If transmission in car, hold one hand on valve body and carefully pry with screwdriver under

the Servo Tube connecting the valve body to the servo. (See Fig. #3)

STEP #7: Let valve body drop down towards the converter.

STEP #8: Remove E-Clip and Detent Bracket from old valve body.

Part #22997 - Stock Shift Pattern PRN21

Part #22998 - Reverse Shift Pattern PRN12

1 2 3 4

Inhaltsverzeichnis

Seite 1 - CHEETAH PRO SERIES

Part #22997 & #22998 1 2/90,4/991535 Owens Road, Jacksonville, FL 32218 (904)741-4850FAX (904)741-4853CHEETAH PRO SERIESPOWERGLIDE TRANZ BRAKE

Seite 2 - 1/16” hole to be drilled

Part #22997 & #22998 2 2/90,4/99STEP #9: Place E-Clip and Detent Bracket on new valve body.STEP #10: Remove Manual Slide Valve from old valve bod

Seite 3

Part #22997 & #22998 3 2/90,4/99STEP #26: Place shift lever guide plate and two bolts into place being sure the Manual Valve is properlylined up w

Seite 4 - Fig. #3 Fig. #4

Part #22997 & #22998 4 2/90,4/99Fig. #1Fig. #2Fig. #3 Fig. #4ServoApplyLineSPRINGUPPER TO LOWER VALVEBODY ATTACHING BOLTSARE 1 3/8” IN LENGTH.1 5/

Kommentare zu diesen Handbüchern

Keine Kommentare

Turbo-action 22997 (PRN21) / 22998 (PRN12) Powerglide Pro Brake Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Turbo-action 22997 (PRN21) / 22998 (PRN12) Powerglide Pro Brake herunter. Turbo Action 22997 (PRN21) / 22998 (PRN12) Powerglide Pro Brake User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Turbo-action 22997 (PRN21) / 22998 (PRN12) Powerglide Pro Brake